IVC East
Triac 22 Series Soft Seated Ball Valves
AT Control / Triac Series 22 ball valves feature a high-quality investment cast body and end. Superior leak protection is accomplished by using our patented “Pyramidal” stem seal system. This advanced system protects against wear and leakage experienced by other ordinary ball valves.
- 2-piece high cycle design
- Available in sizes from 1/4” to 3”
- Stainless Steel | Full Port | Threaded ends | 1000 psi
- RTFE seats standard
- ISO 5211 Direct Actuator Mount
- Blowout Proof Stem w/ Dual Anti-Static Devices
- NACE MR0175
- TA-Luft Certified for Low Emissions
- Pyramidal Stem Seal Packing System
30 Series 3-Way Flanged Ball Valve
Sizes 8″thru 12″
Available in 316SS or WCB
ANSI Class 150 and 300
Full port design
“L” or “T” port configuration
1-pc Ball & Stem
Trunnion ball design
RTFE seats standard
Blowout Proof Stem
31 Series Direct Mount 3-Way Flanged Ball Valve
This 3-way ball valve offers diverting and mixing flow patterns, often eliminating the need for two valves. The full port design is easily automated and is available with various seat materials. The bolts on side flanges make for easy seat changes as necessary to accommodate your service. Available in L or T port configurations.
Triac 33, 43, 53 Series
The multi-port 3, 4 and 5-Way direct mount ball valve offers the superior performance and reliability that is required to optimize process performance. This versatile, high performance multi-port ball valve offers solutions to mixing and diverting with various flow patterns and end configurations available. It can be maintained in-line, leaving the end pieces intact. The direct mount design makes automation easier and maintains a lower profile. This valve features the pyramidal stem design that is so effective in other A-T valve series. There are a myriad of end piece and flow pattern combinations available.
Triac 83 & 8R Series Soft Seated Ball Valves
Triac 83 and 8R Series 3-Piece Ball Valves are the finest quality 3-piece valves on the market. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with Belleville washers, “V” ring packing and a unique primary pyramidal stem seal. This advanced sealing system provides for protection against stem leaks experienced by ordinary ball valves.
Triac 88 Series Soft Seated Ball Valves
The Triac® 88 Series 3-Piece Ball Valves feature a direct mount automation pad. The high-quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with Belleville washers, “V” ring packing and a unique pyramidal stem seal. This advanced sealing system provides protection against stem leaks experienced by ordinary ball valves.
Triac 90 Series Soft Seated Ball Valves
Triac® 90* Series Split Body Flanged Ball Valve: The high-quality investment cast valves feature a fully machined bore. The superior live-loaded packing system is accomplished with Belleville washers, V-ring packing, and a unique primary pyramidal stem seal. This advanced sealing system provides for protection against stem leaks experienced by ordinary ball valves.
Apollo Valves Check Valves
Apollo Valves manufactures bronze commercial Y pattern check valves, as well as stainless steel in line check valves.
Chaoda Check Valves
We offer full opening bolted cover swing check, small forged swing and piston checks and dual plate wafer check valves, all designed specifically to prevent reversal of the flow stream thus protecting other equipment in the piping system.
Our API 594 dual plate check valves are internally installed preventing outside leakage, which is a common problem with external stem design.
Check-All Check Valves
Check-All check valves are available in a wide range of spring settings as well as body and seat materials to meet most application needs. They close quickly and smoothly to eliminate water hammer. Our spring check valves are engineered for silent operation. With proper spring selection, they will perform equally well in either a vertical or horizontal position. Positive sealing is achieved by turbulence introduced upon closing. This agitation removes minute foreign particle suspended in the fluid near the valve seat. The seating surfaces are parallel to each other. thereby eliminating the excessive wear occurring in plug, cone and ball seats.
Ladish Check Valves
The Swing Check Valve is used to prevent back flow in the process line. Flow is in a straight line through the valve resulting in minimal pressure drop.
NEWCO Check Valves
Newmans Valve Newco branded forged and cast valves are ideal for standard and critical industry applications. Available in bolted and welded bonnet configurations, the welded bonnet joint eliminates the body/bonnet flanges.
